861693-B21

General

Device Type: Hard Drive - Hot-Swap
Capacity: 3 TB
Form Factor: 3.5 inch LFF
Interface: SATA-6Gbps
Bytes per Sector: 512
Drive Technology (Fill): Air
Plug Type: Hot Plug
Format Type: 512n
Carrier Type: Smart Carrier (SC)
Features: Digitally Signed Firmware, Native Command Queuing (NCQ), Advanced format 512n
Bundled with: HPE SmartDrive Carrier

Performance

Transfer Rate Synchronous (Max): 6Gb/sec
Seek Time: 7.45 ms (average) / 14.2 ms (max)
Track-to-Track Seek Time: 0.32 ms
Spindle Speed: 7200 RPM

Expansion & Connectivity

Interfaces: 1 x SATA 6 Gb/s - 7 pin Serial ATA
Compatible Bay: 3.5" LFF

Environmental Parameters

Min Operating Temperature: 50 °F (10°C)
Max Operating Temperature: 95 °F (35°C)

Dimensions

Height: 1.06 inch (26.8 mm)
Width: 4.16 inch (105.8 mm)
Depth: 6.69 inch (170.0 mm)

Compatibility Information

Designed For

HPE ProLiant DL Series: DL120 Gen9 (3.5 inch), DL120 Gen9 Entry (3.5 inch), DL160 Gen9 (3.5 inch), DL160 Gen9 Base (3.5 inch), DL160 Gen9 Entry (3.5 inch), DL160 Gen9 Performance (3.5 inch), DL20 Gen9 (3.5 inch), DL20 Gen9 Entry (3.5 inch), DL20 Gen9 Performance (3.5 inch), DL360 Gen10 (3.5 inch), DL360 Gen10 Base (3.5 inch), DL360 Gen10 Entry (3.5 inch), DL360 Gen10 High Performance (3.5 inch), DL360 Gen10 Low (3.5 inch), DL360 Gen10 Performance (3.5 inch), DL360 Gen10 Solution (3.5 inch), DL380 Gen10 (3.5 inch), DL380 Gen10 Base (3.5 inch), DL380 Gen10 Entry (3.5 inch), DL380 Gen10 High Performance (3.5 inch), DL380 Gen10 Performance (3.5 inch), DL380 Gen10 Solution (3.5 inch), DL388 Gen9 (3.5 inch), DL388 Gen9 Base (3.5 inch), DL60 Gen9 (3.5 inch), DL60 Gen9 Base (3.5 inch), DL60 Gen9 Entry (3.5 inch), DL80 Gen9 (3.5 inch), DL80 Gen9 Base (3.5 inch), DL80 Gen9 Entry (3.5 inch) Servers