SHOP WITH CONFIDENCE
7 Day Return
Easy return on this product
Warranty
1 Year Brand & Local Warranty
Free Shipping
Free Shipping upto 16Km around
100% Authentic
Assuring you the genuine produtct
asr-9006-fan Datasheet
Specification |
Model |
|
Cisco ASR 9006 |
Cisco ASR 9010 |
|
Categories |
||
Physical specifications |
Height: 17.50 in. (444.5 mm) (10 RU) Width: 17.38 in. (441.45 mm) Depth: ● With doors: 29.05 in. (737.9 mm)
● Without doors: 29.05 in. (737.9 mm)
Weight: ● 89.55 lb (40.7 kg) (chassis with PEM)
● 150 lb (65.91 kg) (fully loaded, excluding line cards and power modules) – RSP, two v2 FAN trays, PEMs
|
Height: 36.75 in. (933.45 mm) (21 RU) Width: 17.38 in. (441.45 mm) Depth: ● With doors: 29.03 in. (737.4 mm)
● Without doors: 28.24 in. (717.3 mm)
Weight: ● 155.6 lb (70.73 kg) (chassis with PEM)
● 231.6 lb (105.27 kg) (fully loaded, excluding line cards and power modules) – RSP, two v2 fan trays, PEMs
|
Slot orientation |
Horizontal |
Vertical |
Cisco ASR 9000 Series RSP |
Dual redundant RSPs with integrated fabric in 2 slots |
Dual redundant RSPs with integrated fabric in 2 slots |
Cisco ASR 9000 Series line cards |
4 line-card slots |
8 line-card slots |
“Commons” components |
2 RSPs 2 fan trays 1 PEM (either DC or AC) 1 fan filter |
2 RSPs 2 fan trays 2 PEMs (either DC or AC) 1 fan filter |
Reliability and availability |
Fabric redundancy Fan redundancy Feed redundancy Power-supply redundancy RSP redundancy Software redundancy |
Fabric redundancy Fan redundancy Feed redundancy Power-supply redundancy RSP redundancy Software redundancy |
Rack mounting |
19-in. default 21- and 23-in. adapters available Note: Minimum 17.75-in. opening between posts is needed for proper operation |
19-in. default 21- and 23-in. adapters available Note: Minimum 17.75-in. opening between posts is needed for proper operation |
Cabinet mounting |
Yes Note: Doors not recommended in enclosed cabinets |
Yes Note: Doors not recommended in enclosed cabinets |
Wall mounting |
No |
No |
Airflow |
Right-to-back, Front-to-back with baffle |
Front-to-back |
Performance |
||
Fabric |
One per RSP: ● Active/active nonblocking operation mode in dual-RSP redundant configuration
● Fully redundant in dual-RSP redundant configuration
● Built-in service-intelligence and traffic-prioritization capability
|
One per RSP: ● Active/active nonblocking operation mode in dual-RSP redundant configuration
● Fully redundant in dual-RSP redundant configuration
● Built-in service-intelligence and traffic-prioritization capability
|
Thermal |
Two fan trays: ● 6 high-efficiency fans per tray
● Variable-speed fans for optimal thermal performance
● No single point of failure
|
Two fan trays: ● 12 high-efficiency fans per tray
● Variable-speed fans for optimal thermal performance
● No single point of failure
|
Power |
||
Modularity |
Pay-as-you-grow power for future scalability, available in AC and DC. Multiple power module types: ● 3 kW AC power module
● 2.1 kW DC power module
Note: Mixing of AC and DC modules is not supported |
Pay-as-you-grow power for future scalability, available in AC and DC. Multiple power module types: ● 6 kW and 3 kW AC power modules
● 4.4 kW and 2.1 kW DC power modules
Note: Mixing of AC and DC modules is not supported |
Redundancy |
● AC: N+N redundancy
● DC: N+1 redundancy
● Power module redundancy
● A/B Feed redundancy
|
● AC: N+N redundancy
● DC: N+1 redundancy
● Power module redundancy
● A/B Feed redundancy
● PEM redundancy
|
Power zones |
No power zone restrictions Fully load-sharing power infrastructure |
No power zone restrictions Fully load-sharing power infrastructure |
Power input |
Worldwide ranging AC (200-240V; 50-60 Hz; 16A maximum) Worldwide ranging DC (-40 to -72V; 50A nominal, 60A maximum) |
Worldwide ranging AC (200-240V; 50-60 Hz; 16A maximum) Worldwide ranging DC (-40 to -72V; 50A nominal, 60A maximum) |
Power-module airflow |
Front-to-back |
Front-to-back |
Environmental Specifications (All Entries Applicable to Cisco ASR 9006 and ASR 9010) |
||
Operating temperature (nominal) |
41 to 104°F (5 to 40°C) |
|
Operating temperature (short-term) |
ASR 9006: 23 to 131°F (-5 to 55°C) ASR 9010: 23 to 122°F (-5 to 50°C) |
|
Operating humidity (nominal) (relative humidity) |
5 to 90% |
|
Storage temperature |
-40 to 158°F (-40 to 70°C) |
|
Storage (relative humidity) |
5 to 93% |
|
Operating altitude |
-60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements) |
|
Regulatory Compliance (All Entries Applicable to Cisco ASR 9006 and ASR 9010) |
||
Network Equipment Building Standards (NEBS) |
Cisco ASR 9006 and ASR 9010 Routers are designed to meet: ● SR-3580: NEBS Criteria Levels (Level 3)
● GR-1089-CORE: NEBS EMC and Safety
● GR-63-CORE: NEBS Physical Protection
● VZ.TPR.9205: Verizon TEEER
|
|
ETSI standards |
Cisco ASR 9006 and ASR 9010 Routers are designed to meet: ● EN300 386: Telecommunications Network Equipment (EMC)
● ETSI 300 019 Storage Class 1.1
● ETSI 300 019 Transportation Class 2.3
● ETSI 300 019 Stationary Use Class 3.1
|
|
EMC standards emission |
Cisco ASR 9006 and ASR 9010 Routers are designed to meet: ● FCC Class 47CFR15 A
● ICES 003 Class A
● AS/NZS CISRP22 Class A
● CISPR 22 (EN55022) Class A
● VCCI Class A
● BSMI Class A
● IEC/EN 61000-3-12: Power Line Harmonics
● IEC/EN 61000-3-11: Voltage Fluctuations and Flicker
● EN55022: Information Technology Equipment (Emissions)
● EN 50121-4: Railway EMC
|
|
EMC standards immunity |
Cisco ASR 9006 and ASR 9010 Routers are designed to meet: ● IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
● IEC/EN-61000-4-3: Radiated Immunity (10V/m)
● IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
● IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
● IEC/EN-61000-4-5: Signal Surge Ports (1kV)
● IEC/EN-61000-4-5: Surge DC Port (1kV CM, 1kV DM)
● IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
● IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
● IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations
● EN55024: Information Technology Equipment (Immunity)
● EN50082-1/EN-61000-6-1: Generic Immunity Standard
● EN 50121-4: Railway EMC
|
|
Safety |
Cisco ASR 9006 and ASR 9010 Routers are designed to meet: ● UL/CSA/IEC/EN 60950-1
● IEC/EN 60825 Laser Safety
● ACA TS001
● AS/NZS 60950
● FDA Code of Federal Regulations Laser Safety
|