c886va-k9
c886va-k9-Cisco-0
c886va-k9-Cisco-1

C886VA-K9

Cisco C886VA-K9 880 Series Integrated Service Router

Quantity:
Tags: Quality Certifcate:
Switchtechsupply-DND-CertifiedSwitchtechsupply-sam-CertifiedSwitchtechsupply-CAGE-Certified
SHOP WITH CONFIDENCE
benfit-tag
7 Day Return

Easy return on this product

benfit-tag
Warranty

1 Year Brand & Local Warranty

benfit-tag
Free Shipping

Free Shipping upto 16Km around

benfit-tag
100% Authentic

Assuring you the genuine produtct

c886va-k9 Datasheet

 

Technical Specifications

General
Device Type
Router - 4-port switch (integrated)
Enclosure Type
Desktop
Connectivity Technology
Wireless, wired
Data Link Protocol
Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0)
Frequency Band
2.4 GHz
Capacity
Concurrent IPSec tunnels: 20 ¦ Maximum number of configured SSIDs: 16 ¦ Wireless VLANs: 8
Network / Transport Protocol
L2TP, RSVP, IPSec, PPPoE, PPPoA, FTP, DHCP, DNS, L2TPv3, RTP
Routing Protocol
OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, IGMPv3, GRE, policy-based routing (PBR), WCCP, Bidirectional Forwarding Detection (BFD)
Remote Management Protocol
Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI
Encryption Algorithm
LEAP, DES, Triple DES, SSL, PEAP, TKIP, WPA, WPA2, PKI, 128-bit AES, 192-bit AES, 256-bit AES, WEP
Authentication Method
RADIUS, TACACS+, Extensible Authentication Protocol (EAP)
Features
Firewall protection, NAT support, MDI/MDI-X switch, power over Ethernet (PoE), VLAN support, content filtering, DiffServ support, manageable, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Weighted Random Early Detection (WRED), MIMO technology, Virtual Route Redundancy Protocol (VRRP) support, WLAN controller mode, Asynchronous Transfer Mode (ATM), Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), DHCP server, DNS proxy, wireless bridge mode, Bidirectional Forwarding Detection (BFD), DHCP relay, Port Security, 2T3R MIMO technology, DHCP client, Hot Standby Router Protocol (HSRP) support, Virtual Routing and Forwarding (VRF), Ingress Layer 2 MAC Access Control Lists (ACLs), VPN Server, Call Admission Control (CAC), Generic Routing Encapsulation (GRE), DiffServ Code Point (DSCP) support
Compliant Standards
IEEE 802.1D, IEEE 802.1Q, ANSI T1.413, IEEE 802.11b, IEEE 802.3af, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.3ah, Wi-Fi CERTIFIED, IEEE 802.11n (draft 2.0), CISPR 24, EN55022, CISPR 22, EN50082-1, EN55022 Class B, EN 60555-2, FCC CFR47 Part 15, FCC CFR47 Part 15 B, VCCI V-3, IPv6 Ready, EN 61000-3-2:2000, EN 61000-3.3:1995 + A1:2001, KN22, EN 300386, EN55024:1998 + A1 + A2, EN 50082-1:1997
RAM
256 MB
Flash Memory
256 MB
Status Indicators
Port status
Line Properties
Framing Format
ANSI T1.413
Communications
Type
ISDN / DSL modem combo
Digital Signaling Protocol
ADSL2+ over ISDN, VDSL2 over ISDN
Protocols & Specifications
ITU G.991.2 (G.shdsl), ITU G.994.1 (G.hs), ITU G.992.3 (G.DMT.bis), ITU G.992.5, ITU G.992.1 (G.DMT) Annex A, ITU G.992.1 (G.DMT) Annex B, ITU G.992.5 Annex M, ITU G.993.2, ITU G.992.3 Annex M
Expansion / Connectivity
Interfaces
LAN: 2 x 10Base-T/100Base-TX - RJ-45 ¦ LAN: 2 x 10Base-T/100Base-TX (PoE) - RJ-45 ¦ WAN: 1 x ADSL2+ over ISDN ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST ¦ Management: 1 x console - RJ-45
Power
Power Device
External power adapter - 60 Watt
Voltage Required
AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided
Cisco IOS Advanced IP services
Dimensions & Weight
Width
12.8 in
Depth
10.4 in
Height
1.7 in
Weight
5.51 lbs
Environmental Parameters
Min Operating Temperature
32 °F
Max Operating Temperature
104 °F
Humidity Range Operating
10 - 85% (non-condensing

Related Products