C887VA-W-E-K9

General

Device Type

Router - 4-port switch (integrated)

Enclosure Type

Desktop

Connectivity Technology

Wireless, wired

Data Link Protocol

Ethernet, Fast Ethernet

Frequency Band

2.4 GHz

Capacity

IPSec VPN tunnels: 20

Network / Transport Protocol

L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS

Routing Protocol

OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, IGMPv3, GRE

Remote Management Protocol

Telnet, SNMP 3, HTTP, HTTPS, SSH

Encryption Algorithm

DES, Triple DES, SSL, PKI, 128-bit AES, 192-bit AES, 256-bit AES

Authentication Method

RADIUS, TACACS+

Features

Firewall protection, auto-sensing per device, DHCP support, NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy

Compliant Standards

IEEE 802.1D, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n (draft 2.0), VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1

RAM

256 MB (installed) / 768 MB (max) - DDR2 SDRAM - SO-DIMM 200-pin

Flash Memory

128 MB

Status Indicators

Port status, power

Communications

Type

DSL modem

Digital Signaling Protocol

ADSL2, ADSL2+, VDSL2

Protocols & Specifications

ITU G.994.1 (G.hs), ITU G.992.1 (G.DMT) Annex A, ITU G.992.3 Annex A, ITU G.993.2, ITU G.992.5 Annex A

Expansion / Connectivity

Interfaces

4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x ADSL2+ ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x VDSL2

Expansion Slots

1 (total) / 1 (free) x memory

Antenna

Antenna Qty

3

Power

Power Device

External power adapter - 60 Watt

Voltage Required

AC 120/230 V (50/60 Hz)

Software / System Requirements

OS Provided

Cisco IOS Advanced IP services

Dimensions & Weight

Width

12.8 in

Depth

10.4 in

Height

1.7 in

Weight

5.51 lbs

Environmental Parameters

Min Operating Temperature

32 °F

Max Operating Temperature

104 °F

Humidity Range Operating

10 - 85% (non-condensing)