C9115AXE-E
Cisco C9115AXE-E Catalyst 9115 Series Wi-Fi 6 Access Points
Quantity:
SHOP WITH CONFIDENCE
7 Day Return
Easy return on this product
Warranty
1 Year Brand & Local Warranty
Free Shipping
Free Shipping upto 16Km around
100% Authentic
Assuring you the genuine produtct
c9115axe-e Datasheet
Description | Cisco Catalyst 9115AX Access Point, External antenna; Wi-Fi 6; 4x4:4 MIMO, E Domain |
Software | ● Cisco Unified Wireless Network Software Release 8.9 or later |
● Cisco IOS ® XE Software Release 16.11 or later | |
Supported wireless LAN controllers | ● Cisco Catalyst 9800 Series Wireless Controllers |
● Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller | |
802.11n version 2.0 (and related) capabilities | ● 4x4 MIMO with four spatial streams |
● Maximal Ratio Combining (MRC) | |
● 802.11n and 802.11a/g beamforming | |
● 20- and 40-MHz channels | |
● PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) | |
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | |
● 802.11 Dynamic Frequency Selection (DFS) | |
● Cyclic Shift Diversity (CSD) support | |
802.11ac | ● 4x4 downlink MU-MIMO with four spatial streams |
● MRC | |
● 802.11ac beamforming | |
● 20-, 40-, 80-, and 160-MHz channels | |
● PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) | |
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | |
● 802.11 DFS | |
● CSD support | |
802.11ax | ● 4x4 downlink MU-MIMO with four spatial streams |
● Uplink/downlink OFDMA | |
● TWT | |
● BSS coloring | |
● MRC | |
● 802.11ax beamforming | |
● 20-, 40-, 80-, and 160-MHz channels | |
● PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) | |
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | |
● 802.11 DFS | |
● CSD support | |
Integrated antenna | ● 2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth |
● 5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth | |
External antenna (sold separately) | ● Cisco Catalyst 9115AXE Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) |
● Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios | |
Interfaces | ● 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz |
● Management console port (RJ-45) | |
● USB 2.0 (enabled via future software) | |
Indicators | ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
Dimensions (W x L x H) | ● Access point (without mounting brackets): C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm), C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm) |
Input power requirements | ● 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®) |
● Cisco power injector, AIR-PWRINJ6= | |
● 802.3af PoE | |
● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) | |
Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2x2 and Ethernet downgraded to 1 Gigabit Ethernet. In addition, the USB port will be off. | |
Environmental | Cisco Catalyst 9115AXI |
● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | |
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft. | |
● Operating temperature: 32° to 122°F (0° to 50°C) | |
● Operating humidity: 10% to 90% (noncondensing) | |
● Operating altitude test: 40˚C, 9843 ft. | |
Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 4x4 to 2x2 on both the 2.4-GHz and 5-GHz radios, uplink Ethernet will downgrade to 1 Gigabit Ethernet, and the USB interface will be disabled. | |
Cisco Catalyst 9115AXE | |
● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | |
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft. | |
● Operating temperature: -4° to 122°F (-20° to 50°C) | |
● Operating humidity: 10% to 90% (noncondensing) | |
● Operating altitude test: 40˚C, 9843 ft. | |
System memory | ● 2048 MB DRAM |
● 1024 MB flash | |
Available transmit power settings | 2.4 GHz |
● 23 dBm (200 mW) | |
● 20 dBm (100 mW) | |
● 17 dBm (50 mW) | |
● 14 dBm (25 mW) | |
● 11 dBm (12.5 mW) | |
● 8 dBm (6.25 mW) | |
● 5 dBm (3.13 mW) | |
● 2 dBm (1.56 mW) | |
● -1dBm (0.79mW) | |
● -4dBm (0.39mW) | |
5 GHz | |
● 23 dBm (200 mW) | |
● 20 dBm (100 mW) | |
● 17 dBm (50 mW) | |
● 14 dBm (25 mW) | |
● 11 dBm (12.5 mW) | |
● 8 dBm (6.25 mW) | |
● 5 dBm (3.13 mW) | |
● 2 dBm (1.56 mW) | |
● -1dBm (0.79mW) | |
● -4dBm (0.39mW) | |
Frequency band and 20-MHz operating channels | E (E regulatory domain): |
● 2.412 to 2.472 GHz; 13 channels | |
● 5.180 to 5.320 GHz; 8 channels | |
● 5.500 to 5.700 GHz; 8 channels | |
(excludes 5.600 to 5.640 GHz) |