C9115AXE-I
Cisco C9115AXE-I Catalyst 9115 Series Wi-Fi 6 Access Points
Quantity:
SHOP WITH CONFIDENCE
7 Day Return
Easy return on this product
Warranty
1 Year Brand & Local Warranty
Free Shipping
Free Shipping upto 16Km around
100% Authentic
Assuring you the genuine produtct
c9115axe-i Datasheet
Description |
Cisco Catalyst 9115AX Access Point, External antenna; Wi-Fi 6; 4x4:4 MIMO, I Domain |
Software |
Cisco Unified Wireless Network Software Release 8.9 or later |
Cisco IOS ® XE Software Release 16.11 or later |
|
Supported wireless LAN controllers |
Cisco Catalyst 9800 Series Wireless Controllers |
Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller |
|
802.11n version 2.0 (and related) capabilities |
4x4 MIMO with four spatial streams |
Maximal Ratio Combining (MRC) |
|
802.11n and 802.11a/g beamforming |
|
20- and 40-MHz channels |
|
PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) |
|
Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) |
|
802.11 Dynamic Frequency Selection (DFS) |
|
Cyclic Shift Diversity (CSD) support |
|
802.11ac |
4x4 downlink MU-MIMO with four spatial streams |
MRC |
|
802.11ac beamforming |
|
20-, 40-, 80-, and 160-MHz channels |
|
PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) |
|
Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) |
|
802.11 DFS |
|
CSD support |
|
802.11ax |
4x4 downlink MU-MIMO with four spatial streams |
Uplink/downlink OFDMA |
|
TWT |
|
BSS coloring |
|
MRC |
|
802.11ax beamforming |
|
20-, 40-, 80-, and 160-MHz channels |
|
PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) |
|
Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) |
|
802.11 DFS |
|
CSD support |
|
Integrated antenna |
2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth |
5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth |
|
External antenna (sold separately) |
Cisco Catalyst 9115AXE Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) |
Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios |
|
Interfaces |
1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz |
Management console port (RJ-45) |
|
USB 2.0 (enabled via future software) |
|
Indicators |
Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
Dimensions (W x L x H) |
Access point (without mounting brackets): C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm), C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm) |
Input power requirements |
802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®) |
Cisco power injector, AIR-PWRINJ6= |
|
802.3af PoE |
|
Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) |
|
Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2x2 and Ethernet downgraded to 1 Gigabit Ethernet. In addition, the USB port will be off. |
|
Environmental |
Cisco Catalyst 9115AXI |
Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) |
|
Nonoperating (storage) altitude test: 25˚C, 15,000 ft. |
|
Operating temperature: 32° to 122°F (0° to 50°C) |
|
Operating humidity: 10% to 90% (noncondensing) |
|
Operating altitude test: 40˚C, 9843 ft. |
|
Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 4x4 to 2x2 on both the 2.4-GHz and 5-GHz radios, uplink Ethernet will downgrade to 1 Gigabit Ethernet, and the USB interface will be disabled. |
|
Cisco Catalyst 9115AXE |
|
Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) |
|
Nonoperating (storage) altitude test: 25˚C, 15,000 ft. |
|
Operating temperature: -4° to 122°F (-20° to 50°C) |
|
Operating humidity: 10% to 90% (noncondensing) |
|
Operating altitude test: 40˚C, 9843 ft. |
|
System memory |
2048 MB DRAM |
1024 MB flash |
|
Available transmit power settings |
2.4 GHz |
23 dBm (200 mW) |
|
20 dBm (100 mW) |
|
17 dBm (50 mW) |
|
14 dBm (25 mW) |
|
11 dBm (12.5 mW) |
|
8 dBm (6.25 mW) |
|
5 dBm (3.13 mW) |
|
2 dBm (1.56 mW) |
|
-1dBm (0.79mW) |
|
-4dBm (0.39mW) |
|
5 GHz |
|
23 dBm (200 mW) |
|
20 dBm (100 mW) |
|
17 dBm (50 mW) |
|
14 dBm (25 mW) |
|
11 dBm (12.5 mW) |
|
8 dBm (6.25 mW) |
|
5 dBm (3.13 mW) |
|
2 dBm (1.56 mW) |
|
-1dBm (0.79mW) |
|
-4dBm (0.39mW) |
|
Frequency band and 20-MHz operating channels |
I (I regulatory domain): |
2.412 to 2.472 GHz; 13 channels |
|
5.180 to 5.320 GHz; 8 channels |