ME-4506E-S7L+96SFP
Cisco ME-4506E-S7L+96SFP Catalyst 4506-E Switch 96 Ports Managed Rack-mountable with Cisco Catalyst 4500 Supervisor Engine 7L-E, 2x Cisco Line Cards
Quantity:
SHOP WITH CONFIDENCE
7 Day Return
Easy return on this product
Warranty
1 Year Brand & Local Warranty
Free Shipping
Free Shipping upto 16Km around
100% Authentic
Assuring you the genuine produtct
me-4506e-s7l+96sfp Datasheet
General |
|
Device Type |
Switch - 96 ports - managed - with Cisco Catalyst 4500 Supervisor Engine 7L-E, 2x Cisco Line Cards (ME-X4748-SFP-E) |
Enclosure Type |
Rack-mountable 10U |
Subtype |
Gigabit Ethernet |
Ports |
96 x Gigabit SFP + 2 x Gigabit SFP + 2 x combo 10 Gigabit SFP+ |
Performance |
Switching capacity: 520 Gbps ¦ Per-slot switching capacity: 48 Gbps ¦ IPv6 routing: 110 Mbps ¦ IPv4 routing: 225 Mbps |
Capacity |
QoS hardware entries: 64000 ¦ Security services entries: 64000 ¦ Virtual interfaces (VLANs): 4094 ¦ IPv4 routes: 64000 ¦ IPv6 routes: 32000 ¦ Spanning Tree Protocol instances: 12000 ¦ Switched virtual interfaces (SVIs): 4094 ¦ NetFlow entries: 128000 ¦ ARP entries: 47000 |
MAC Address Table Size |
55K entries |
Jumbo Frame Support |
9216 bytes |
Routing Protocol |
PIM-SSM |
Remote Management Protocol |
RMON 1, RMON 2 |
Authentication Method |
Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
Features |
Flow control, modular design, layer 2 switching, IPv6 support, half duplex mode, full duplex mode, Spanning Tree Protocol (STP) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, PoE+, IPv4 support, Link Aggregation Control Protocol (LACP), NetFlow |
Compliant Standards |
IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s |
Processor |
1: 1.5 GHz |
RAM |
2 GB SDRAM |
Flash Memory |
1 GB |
Status Indicators |
Port status, power, link OK, status of modules, link/activity |
Expansion / Connectivity |
|
Interfaces |
96 x 1000Base-X SFP ¦ 1 x console RJ-45 ¦ 1 x management (Gigabit LAN) RJ-45 ¦ 1 x USB Type A ¦ 4 x 1000Base-X SFP uplink ¦ 2 x 10GBase-X SFP+ uplink |
Expansion Slots |
7 (total) / 4 (free) x expansion slot ¦ 1 (total) / 1 (free) x SD Memory Card |
Installed Modules Qty (Max) |
3 (installed) / 7 (max) |
Power |
|
Power Device |
Internal power supply (not installed) - hot-plug |
Installed Qty |
0 (installed) / 2 (max) |
Max Supported Qty |
2 |
Power Redundancy |
Yes |
Software / System Requirements |
|
Software Included |
Cisco IOS LAN Base |
Miscellaneous |
|
Rack Mounting Kit |
Included |
MTBF |
710,119 hours |
Compliant Standards |
NEBS level 3, FCC Class A certified, EN 60950, EN 61000-3-2, EN55022, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, EN50082-1, CSA 22.2 No. 60950, EN 61000-6-1, ACA TS001, AS/NZS 3260, FCC Part 68, AS/NZ 3548 Class A, JATE, ICES-003 Class A, CS-03, FCC CFR47 Part 15, EN 300 386 |
Dimensions & Weight |
|
Width |
17.3 in |
Depth |
12.5 in |
Height |
17.4 in |
Environmental Parameters |
|
Min Operating Temperature |
32 °F |
Max Operating Temperature |
104 °F |
Humidity Range Operating |
10 - 90% (non-condensing) |
Min Storage Temperature |
-40 °F |
Max Storage Temperature |
167 °F |