ICX7250-48-2X10G
Brocade ICX7250-48-2X10G 48-Port 10/100/1000 Mbps RJ-45 Switch with Eight 1 GbE Uplink/Stacking Ports
Quantity:
SHOP WITH CONFIDENCE
7 Day Return
Easy return on this product
Warranty
1 Year Brand & Local Warranty
Free Shipping
Free Shipping upto 16Km around
100% Authentic
Assuring you the genuine produtct
icx7250-48-2x10g Datasheet
Layer 2 switching
- 802.1s Multiple Spanning Tree
- 802.1x Authentication
- Auto MDI/MDIX
- BPDU Guard, Root Guard
- Dual-Mode VLANs
- MAC-based VLANs, Dynamic MAC-based VLAN activation
- Dynamic VLAN Assignment
- Dynamic Voice VLAN Assignment
- Fast Port Span
- GARP VLAN Registration Protocol
- IGMP Snooping (v1/v2/v3)
- IGMP Proxy for Static Groups
- IGMP v2/v3 Fast Leave
- IGMP Tracking
- Inter-Packet Gap (IPG) adjustment
- Link Fault Signaling (LFS)
- MAC Address Filtering
- MAC Learning Disable
- MLD Snooping (v1/v2)
- Multi-device Authentication
- Per-VLAN Spanning Tree (PVST/PVST+/PVRST)
- Mirroring - Port-based, ACL-based, MAC Filterbased, and VLAN-based
- PIM-SM v2 Snooping
- Port Loop Detection
- Private VLAN
- Remote Fault Notification (RFN)
- Single-instance Spanning Tree
- Single-link LACP
- Trunk Groups
- Uni-Directional Link Detection (UDLD)
Base Layer 3 IP routing
- IPv4 and IPv6 static routes
- ECMP
- Port-based Access Control Lists
- L3/L4 ACLs
- Host routes
- Virtual Interfaces
- Routed Interfaces
- Route-only Support
- Routing Between Directly Connected Subnets
Premium Layer 3 IP routing
- IPv4 and IPv6 dynamic routes
- RIP v1/v2
- OSPF v2
- Virtual Route Redundancy Protocol (VRRP)
- VRRP-E
- IPv6 over IPv4 tunnels
- PIM-SM, PIM-SSM, PIM-DM, PIM passive (IPv4/ IPv6 multicast routing functionality)
- OSPF v3
- VRRP v3
- RIPng
SDN features
- Support for OpenFlow v1.0 and v1.3
- OpenFlow support with true hybrid port mode
- Operates seamlessly under the Brocade SDN Controller
Metro features
- Metro-Ring Protocol MRP (v1, v2)
- Virtual Switch Redundancy Protocol (VSRP)
- VLAN Stacking (Q-in-Q)
- VRRP
- Topology Groups
Quality of Service (QoS)
- ACL Mapping and Marking of ToS/DSCP (CoS)
- ACL Mapping and Marking of 802.1p
- ACL Mapping to Priority Queue
- ACL Mapping to ToS/DSCP
- Classifying and Limiting Flows Based on TCP Flags
- DHCP Relay
- DiffServ Support
- Honoring DSCP and 802.1p
- MAC Address Mapping to Priority Queue
- Priority Queue Management using Weighted Round Robin (WRR), Strict Priority (SP), and a combination of WRR and SP
IEEE standards compliance
- 802.1AB LLDP/LLDP-MED
- 802.1D-2004 MAC Bridging
- 802.1p Mapping to Priority Queue
- 802.1s Multiple Spanning Tree
- 802.1w Rapid Spanning Tree (RSTP)
- 802.1x Port-based Network Access Control
- 802.3 10Base-T
- 802.3ab 1000Base-T
- 802.3ad Link Aggregation (Dynamic and Static)
- 802.3ae 10 Gigabit Ethernet
- 802.3af Power over Ethernet
- 802.3at Power over Ethernet Plus
- 802.3u 100Base-TX
- 802.3x Flow Control
- 802.3z 1000Base-SX/LX
- 802.3 MAU MIB (RFC 2239)
- 802.3az-2010 - EEE
- 802.1Q VLAN Tagging
Traffic management
- ACL-based inbound rate limiting and traffic policies
- Broadcast, multicast, and unknown unicast rate limiting
- Inbound rate limiting per port
- Outbound rate limiting per port and per queue
High availability
- L3 VRRP/VRRP-E protocol redundancy
- Real-time state synchronization across the stack
- Hitless failover and switchover from master to standby stack controller
- Hot insertion and removal of stacked units
Network and Device Management
Management
- Auto Configuration
- Configuration Logging
- Digital Optical Monitoring
- Display Log Messages on Multiple Terminals
- Embedded Web Management
- Embedded DHCP Server
- Industry-standard Command Line Interface (CLI)
- Key-based activation of optional software features
- Integration with HP OpenView for Sun Solaris, HPUX, IBM AIX, and Windows
- Brocade Network Advisor
- MIB Support for MRP, Port Security, MAC Authentication, and MAC-based VLANs
- Out-of-band Ethernet Management
- ERSPAN support for remote traffic monitoring
- RFC 783 TFTP
- RFC 854 TELNET Client and Server
- RFC 951 Bootp
- RFC 1157 SNMPv1/v2c
- RFC 1213 MIB-II
- RFC 1493 Bridge MIB
- RFC 1516 Repeater MIB
- RFC 1573 SNMP MIB II
- RFC 1643 Ethernet Interface MIB
- RFC 1724 RIP v1/v2 MIB
- RFC 1757 RMON MIB
- RFC 2068 Embedded HTTP
- RFC 2131 DHCP Server and DHCP Relay
- RFC 2570 SNMPv3 Intro to Framework
- RFC 2571 Architecture for Describing SNMP Framework
- RFC 2572 SNMP Message Processing and Dispatching
- RFC 2573 SNMPv3 Applications
- RFC 2574 SNMPv3 User-based Security Model
- RFC 2575 SNMP View-based Access Control Model SNMP
- RFC 2818 Embedded HTTPS
- RFC 3176 sFlow
- SNTP Simple Network Time Protocol
- Multiple Syslog Servers
Security
- 802.1X Accounting
- MAC Authentication
- DHCP snooping
- Dynamic ARP inspection
- Bi-level Access Mode (Standard and EXEC Level)
- EAP pass-through support
- IEEE 802.1X username export in sFlow
- Protection against Denial of Service (DoS) attacks
- Authentication, Authorization, and Accounting (AAA)
- Advanced Encryption Standard (AES) with SSHv2
- RADIUS/TACACS/TACACS+
- Secure Copy (SCP)
- Secure Shell (SSHv2)
- Username/Password
- Web authentication
- Change of Authorization (CoA) RFC 5176
- Flexible authentication