RV180W

Cisco RV180W Specs

Standards

IEEE 802.11n

IEEE 802.11g

IEEE 802.11b

IEEE 802.3

IEEE 802.3u

IEEE 802.1D

IEEE 802.1p

IEEE 802.11e

IEEE 802.11w (Rapid Spanning Tree)

IEEE 802.1X (security authentication)

IEEE 802.1Q (VLAN)

IEEE 802.11i (Wi-Fi Protected Access [WPA2] security)

IEEE 802.11e (wireless QoS)

IPv4 (RFC 791)

IPv6 (RFC 2460)

Routing Information Protocol (RIP) v1 (RFC 1058)

RIP v2 (RFC 1723)

Ports

LAN, WAN

Switch

Power button (on/off)

Buttons

Reset

Cabling Type

Category 5e or better

LEDs

Power, WPS, WAN, wireless, LAN (ports 1-4), Additional LEDs for multifunction router, access point, bridge on RV180W

Operating System

Linux

Network Protocols

Dynamic Host Configuration Protocol (DHCP) server

Point-to-Point Protocol over Ethernet (PPPoE)

Point-to-Point Tunneling Protocol (PPTP)

Layer 2 Tunneling Protocol (L2TP)

DNS proxy

DHCP relay agent

IGMP proxy and multicast forwarding

Rapid Spanning Tree Protocol (RSTP)

Network Address Translation (NAT), Port Address Translation (PAT)

One-to-One NAT

Port management

Port mirroring

Software configurable DMZ to any LAN IP address

Session Initiation Protocol (SIP) Application Layer Gateways (ALG)

LAN

4 x 10/100/1000 Mbps Gigabit LAN ports with managed switch

WAN

1 x 10/100/1000 Mbps Gigabit Wan port

WLAN

Built-in high-speed 802.11n wireless access point

Routing Protocols

Static routing

Dynamic routing

RIP v1 and v2

Inter-VLAN routing

Network Address Translation (NAT)

Port Address Translation (PAT), Network Address Port Translation (NAPT) protocol

VLAN Support

Port-based and 802.1Q tag-based VLANs

Number of VLANs

4 x active VLANs (3-4096 range)

IPv6

Dual-stack IPv4 and IPv6

6to4 tunneling

Multicast Listener Discovery (MLD) for IPv6 (RFC2710)

Stateless address auto-configuration

DHCPv6 Server for IPv6 Clients on LAN

DHCP v6 client for WAN connectivity

Internet Control Message Protocol (ICMP) v6

Static IPv6 Routing

Dynamic IPv6 Routing with RIPng

Network Edge (DMZ)

Software configurable to any LAN IP address

Layer 2 Features

802.1Q-based VLANS, 4 active VLANS

Firewall

Stateful packet inspection (SPI) firewall, port forwarding and triggering, denial-of-service (DoS) prevention, software-based DMZ

DoS Attacks Prevented:

SYN Flood Detect Rate (max/sec)

Echo Storm (ping pps)

ICMP Flood (ICMP pps)

Block UDP Flood

Block TCP Flood

Block Java, Cookies, Active-C, HTTP Proxy

Access Control

IP access control lists; MAC-based wireless access control

Content Filtering

Static URL blocking or keyword blocking

Secure Management

HTTPS, username/password complexity

WPS Button

Wi-Fi Protected Setup

Certificate Management

Self-signed SSL certificate, import/export certificate using Privacy-Enhanced Mail (PEM) format

User Privileges

2 levels of access: admin and guest

VPN

IPsec VPN: 10 x gateway-to-gateway IPSec tunnels

QuickVPN: 10 x Quick VPN tunnels using Cisco QuickVPN client

PPTP VPN: 10 x PPTP tunnels for remote client access

Encryption Triple Data Encryption Standard (3DES)

Authentication MD5/SHA1

VPN Pass-through IPsec/PPTP/Layer 2 Tunneling Protocol (L2TP) pass-through

Quality of Service (QoS)

802.1p port-based priority on LAN port, application-based priority on WAN port

4 queues

Differentiated Services Code Point support (DSCP)

Class of Service (CoS)

Bandwidth Management for service prioritization

Jumbo Frame: Supports Jumbo Frame on Gigabit ports - at least 1536B

NAT Throughput

800 Mbps

Concurrent Sessions

12,000

IPsec VPN Throughput (3DES / AES)

50 Mbps

Web User Interface

Browser-based configuration (HTTP/HTTPS)

Management Protocols

Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour, Universal Plug and Play (UPnP)

Event Logging

Local, syslog, email alerts

Network Diagnostics

Ping, Traceroute, and DNS Lookup

Upgradability

Firmware upgradable through web browser, imported/exported configuration file

System Time

Supports NTP, Day Light Savings, Manual entry

Languages

GUI supports English, French, Italian, German, Spanish, and Japanese

Wireless

Radio and Modulation Type

802.11b: direct sequence spread spectrum (DSSS)

802.11g: orthogonal frequency division multiplexing (OFDM)

802.11n: OFDM

WLAN

2.4 GHz IEEE 802.11n standard-based access point with 802.11b/g compatibility

Operating Channels

11 North America, 13 most of Europe, auto channels selection

Wireless Isolation

Wireless isolation between clients

External Antennas

2 x fixed antennas

Antenna Gain In dBi

1.8 dBi

Transmit Power

802.11b: 17 dBm +/- 1.5 dBm; 802.11g: 15 dBm +/- 1.5 dBm; 802.11n: 12.5 dBm +/- 1.5 dBm

Receiver Sensitivity

-87 dBm at 11 Mbps, -71 dBm at 54 Mbps, -68 dBm at mcs15, HT20, -66 dBm at mcs15, HT40

Radio Frequency

Single-band, works on 2.4 GHz

Wireless Domain Service (WDS)

Allows wireless signals to be repeated by up to 3 compatible devices

Operating Modes

Multifunction device-wireless router, access point mode with WDS, Point-to-Point Bridge mode with WDS, Point-Multi Point Bridge mode with WDS, Repeater mode with WDS

Active WLAN Clients

Recommended 10 concurrent client (max 16) in wireless router mode; and 20 concurrent client (max32) in wireless Access Point mode

Multiple SSIDs

Supports multiple Service Set Identifiers (SSIDs), up to 4 separate virtual networks

Wireless VLAN Map

Supports SSID to VLAN mapping with wireless client isolation

WLAN security

Wired Equivalent Privacy (WEP), WPA, WPA2-PSK, WPA2-ENT, 802.11i

Wi-Fi Multimedia (WMM)

WMM with QoS (802.1e), WMM power save (WMM-PS)

Environmental

Power

12 V 1 A

Certifications

FCC class B, CE, IC, Wi-Fi

Operating Temperature

32 to 104°F / 0 to 40°C

Storage Temperature

-4 to 158°F / -20 to 70°C

Operating Humidity

10 to 85% non-condensing

Storage Humidity

5 to 90% non-condensing